
A fresh start for tired Apopka pavers
Paver Restoration and Resealing in Apopka, FL
Ask for a free paver restoration estimate in Apopka when sealer turns cloudy or peels, or call (689) 529-7659.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Can my worn out pavers be restored in Apopka, and who answers first?
A local contractor restores faded, peeling and mildewed pavers across Apopka, FL, and you will hear back inside 1 business day, often within hours. The look over is free, and you decide whether to book. Tell the contractor your street or ZIP code and what the surface looks like now. To start, call (689) 529-7659.
Restoration goes further than a wash. It strips a failed coat, repairs low or loose spots, refills the joints and puts down new sealer, so the surface starts over instead of carrying old problems under new ones. Think of the driveway that went cloudy and sticky a few summers after its first coat. To ask whether yours qualifies, ask for a free Apopka estimate.
Which towns near Apopka can book paver restoration?
Restoration work is booked across Apopka and the towns around it, from Wekiwa Springs and Lockhart to Tavares and Groveland. Every town below has a page of its own. If your street is not listed, call (689) 529-7659.

How do I know the sealer on my Apopka pavers has failed?
Kennelly Paver Sealing names three signs: sealer that has turned white, gone cloudy or started peeling. Those are the usual triggers for a strip. Photograph the worst patches before the visit. To compare them with a contractor, ask for a free Apopka estimate.
White or cloudy film
Castle Clean and Seal says solvent-based sealer turns white in Florida humidity.
Peeling or flaking
Loose flakes of old coat mean new sealer would have nothing solid to bond to.
Sticky or glassy patches
A surface that looks glossy in spots and dull in others often carries two coats that never matched.
Mildew back already
Algae that returns within months can point to a coat that never sealed the surface well.
Does old sealer have to come off before pavers are resealed?
Often, yes. Castle says an old low-quality sealer needs to be chemically stripped before new sealer can bond, and that skipping this makes the new coat fail about as quickly as the old one. A contractor decides after seeing the surface. To book that look, call (689) 529-7659.
When stripping makes sense
Kennelly says stripping fits when the old sealer is the wrong type or has turned white, cloudy or started peeling. Two or three layers from different years make the case stronger. Ask the contractor what they see on yours when you send the short form.
What stripping involves
Kennelly describes a commercial-grade coating removal that softens several layers of failed sealer, topical coatings and leftover polymeric joint sand, then a full clean, re-sanding and a new coat. It runs two to three days against one for a standard job. To plan around those days, call (689) 529-7659.
When a cleaning and new coat is enough
A coat that is thin or dull but still sound may not need stripping at all. The contractor can tell you which path fits, and a lighter job costs less. Ask for both prices when you request a free price.
What goes into restoring Apopka pavers beyond the new coat?
Castle describes a four step system that works as a good outline for restoration: kill growth, clean, stabilize the joints and seal. Preparation is where most failures start. To ask how a contractor covers each step, call (689) 529-7659.
Kill it at the root
Castle uses a biodegradable algaecide for mold, algae, mildew and weeds before cleaning.
Low pressure wash
A high volume, low pressure system lifts dirt and growth without blasting the joints open.
Reset what has moved
Sunken or rocking pavers are lifted and relaid on fresh base so the surface sits level.
Wet sand joints
Castle packs joint sand in with a wet sand process, which holds weeds back.
Two to three coats
Castle puts down two to three coats of water-based sealer at the end.
What does white haze have to do with a restoration?
Sometimes the white film is not old sealer at all. Wikipedia explains efflorescence as salt carried to the surface by water, a deposit that can normally be brushed off and is mostly cosmetic when the salt comes from inside the material. Show the contractor where it sits when you ask for a free Apopka estimate.
A sealer will not end the haze for good, since Wikipedia says impregnating sealers cannot permanently prevent it. Castle lists white chalky residue as something that adds time and materials to a job. Ask whether haze is part of the plan when you call (689) 529-7659.
How do Apopka rain and growth years shape restoration work?
Three local facts shape how a restoration goes here. None of them changes the steps, but each changes the schedule and the wear. To talk through yours, call (689) 529-7659.
Rain sets the calendar
Wikipedia lists 50.32 inches of rain a year in Apopka and about 115 rainy days, with August the wettest month at 8.36 inches. A strip and reseal needs dry days at each stage, so wet weeks push the finish back. Ask how a contractor handles rain delays when you send the short form.
Pavers from the growth years
Apopka went from 26,642 residents in 2000 to 41,542 in 2010 and 54,873 in 2020, according to Wikipedia. Many driveways and lanais were laid during that stretch, and a surface that old may have seen more than one coat. Tell the contractor what you know about yours when you request a free price.
Humid air feeds growth
Kennelly says humidity feeds algae, and Castle puts Central Florida humidity above 80 percent. That is why a restored surface still needs a cleaning every 12 to 15 months to hold the result. To set up that rhythm, call (689) 529-7659.
How much does paver restoration cost in Apopka?
Kennelly Paver Sealing lists $3.50 to $5.00 per square foot to strip and reseal, with typical projects between $1,750 and $5,000. That price covers chemical stripping, a full clean, re-sanding and the new coat. Castle Clean and Seal says stripping usually adds $500 to $1,000 or more added to its standard price, and says about 20 percent of its jobs correct failed do it yourself sealing at an added $1,000 to $3,500. For a number on your pavers, ask for a free Apopka estimate.
A standard clean, sand and seal runs $1.50 to $3.00 per square foot, so restoration costs more because it removes the old coat first. Castle sets a $1,000 minimum. Holding a quote already? Call (689) 529-7659 and compare it with the table below.
Want to see what each step costs alone? The page on paver sealing covers a standard coat, stain removal covers marks and the town list shows where the work is offered. To price a combined visit, ask for a written number.
| Paved area | Typical example | Standard clean, sand and seal | Strip and reseal |
|---|---|---|---|
| 500 sq ft | Walkway and entry | $750 to $1,500 | $1,750 to $2,500 |
| 800 sq ft | Two car driveway | $1,200 to $2,400 | $2,800 to $4,000 |
| 1,200 sq ft | Large driveway or pool deck | $1,800 to $3,600 | $4,200 to $6,000 |
The standard column uses the $1.50 to $3.00 per square foot that Central Florida paver companies published as of November 2026. The strip and reseal column uses the $3.50 to $5.00 per square foot that Kennelly Paver Sealing published for Orlando. Castle Clean and Seal sets a $1,000 minimum, and resetting sunken pavers is usually priced apart.

What is the paver restoration process from start to finish?
Most restorations follow seven steps, from the first look to the final walk-through. Kennelly puts a strip and reseal at two to three days. To get on the schedule, call (689) 529-7659.
1. Look over the surface
The contractor checks the pavers, joints and old coat, and marks where water sits.
2. Strip failed sealer
A removal product softens old coats and leftover joint material where a strip is needed.
3. Reset what moved
Sunken or loose pavers are lifted, the base is leveled and the pavers go back down.
4. Clean and rinse
Algae is treated, and a low pressure wash rinses the surface clean.
5. Refill the joints
Fine sand goes into every gap and is settled in place.
6. Let it dry
The surface dries fully, and Apopka humidity can stretch this part.
7. Apply the new sealer
Even coats go on, and the contractor walks the job with you.
What do restored pavers look like around Apopka?








How long does a restored and resealed surface last?
Kennelly says a coat lasts two to four years in Orlando, and a cleaning every 12 to 15 months helps it last. Castle says cheap sealers can fail in 6 to 12 months, so the product matters as much as the prep. Ask what is going on the pavers and how long it is expected to hold when you ask for a free Apopka estimate.
Foot traffic, tires and shade all change the answer. A driveway in open sun and a walk under oaks wear differently. Tell the contractor how each space gets used when you call (689) 529-7659.
Is restoring pavers better than replacing them?
No page read for this site prices a full replacement, so there is no published figure to compare. If the pavers are level and sound, restoration keeps what you have and renews the surface. If the base has failed across a large area, resetting or relaying may be the better road. Ask for both numbers in writing when you start a free estimate.
What do Apopka homeowners ask before restoring pavers?
Cost, stripping, timing and rain come up most. Short answers are below, and for anything else you can ring (689) 529-7659.
How long does paver sealing last in Florida?
Kennelly Paver Sealing says a coat lasts two to four years in Orlando, and a cleaning every 12 to 15 months helps it hold. Castle Clean and Seal says cheap sealers can break down in 6 to 12 months, which is when many homeowners call for restoration.
Is there a downside to sealing pavers?
The downside is a wrong or cheap product. Castle Clean and Seal says low-quality sealers can break down in 6 to 12 months and that solvent-based sealer turns white and peels in Florida humidity. A coat laid over dirt also traps stains, which is why a restoration starts with stripping and a wash.
Should you seal pavers in Florida?
Many homeowners do. Castle says Florida humidity over 80 percent and strong sun are hard on pavers, and Kennelly says humidity feeds algae. A restoration is the reset that lets a new coat do its work.
What is the average cost to seal pavers in Florida?
Castle and Kennelly both publish $1.50 to $3.00 per square foot for a standard clean, sand and seal. Restoration costs more, since Kennelly lists $3.50 to $5.00 per square foot to strip and reseal.
Does old sealer have to be stripped before pavers are resealed?
Often. Castle says an old low-quality coat needs to be chemically stripped before new sealer can bond, and that skipping this makes the new coat fail about as fast as the old one. A thin but sound coat may only need a cleaning.
How long does a strip and reseal take in Apopka?
Kennelly puts a strip and reseal at two to three days, against one day for a standard job. Rain can stretch it, since Apopka averages about 115 rainy days a year, according to Wikipedia.
Why is the sealer on my pavers turning white or cloudy?
Castle says solvent-based sealer turns white and peels in Florida humidity, and Kennelly lists white, cloudy or peeling sealer as the sign a strip is needed. White haze can also be efflorescence, which Wikipedia calls mostly cosmetic.
Can restoration remove weeds, algae and old stains?
It treats weeds and algae at the root, and Castle describes an algaecide step before the wash. Stains are less certain, since Paver Savers of Central Florida says oil and rust stains present for months or years may not come out.
What if my pavers have sunk or rock underfoot?
A coat does not fix that. Pavers that shift need to be reset before the wash and sand, and Castle says cutting corners on preparation is the main reason sealing fails there. Ask whether resetting is in the quote.
How soon can a contractor look at my Apopka pavers?
A local contractor replies inside 1 business day, often within hours. The visit tells you whether you need a strip, a repair, or only a new coat.
What other paver work can a contractor handle in Apopka?
Give your Apopka pavers a clean slate
Send your street and a few words about the surface, and a local contractor answers inside 1 business day, often within hours.
Free, no obligation
